LUKS Encrypted Drive Recovery. A Linux Or NAS Disk, Opened On Windows.

LUKS is the encryption Linux uses for whole disks and partitions and NAS boxes use it for their encrypted volumes. Windows cannot open it at all. DRE Pro can: give it the passphrase or the key file and it reads the LUKS header, unlocks the volume in memory and reads the Linux file system inside, so Quick Scan, Deep Scan, preview and recovery work on it as on any drive. Nothing is written to the disk.

What LUKS Encrypted Drive Recovery Looks Like In DRE Pro

These are the tools DRE Pro gives you for this job and what each one does. The free download includes the scan and the preview, so you can see what it finds on your own drive before you decide whether a licence is worth buying.

01

LUKS1 And LUKS2

Both header versions, LUKS2's second copy of its header included, with PBKDF2, Argon2i and Argon2id key slots tried in turn.

02

Passphrase Or Key File

The passphrase typed when the system starts or a key file, read as cryptsetup reads it.

03

The Usual Ciphers

AES, Serpent, Twofish and Camellia in XTS, CBC-ESSIV and CBC-plain, the modes cryptsetup sets up.

04

NAS Volumes

A QNAP encrypted volume is tried with its volume password, turned into the key QNAP's firmware uses and a Synology volume with its recovery key file. Being tested on real NAS disks.

05

The File System Inside

Once unlocked, ext4, XFS, Btrfs and the other Linux file systems DRE Pro reads are opened with their folders and names.

06

Inside Images Too

A LUKS partition inside a raw, E01, VHD(X), VMDK or QCOW2 image unlocks the same way.

Locked, Then Unlocked, Then Scanned.

A LUKS partition is named on its card, LUKS1 or LUKS2 and marked Locked, with an Unlock button. The passphrase is used in memory and never saved.

How It Works, Step By Step

  1. Connect the Linux or NAS disk to a Windows PC or open an image of it and run DRE Pro as administrator.
  2. Select the partition marked LUKS and Locked and press Unlock.
  3. Type the passphrase or choose the key file.
  4. Scan the unlocked volume and save what you need to a different drive.

Is This The Right Tool? The Short Answer

It is the right tool if your situation is under Use It When and your drive is under Works With. Check Its Limits before you buy. The free download scans the drive and shows the files it finds, so you can see the result before you pay anything.

Use It When

  • A Linux disk encrypted with LUKS has to be read on Windows.
  • Files were deleted or lost on an encrypted Linux partition.
  • A NAS's encrypted volume has to be read from its disks.
  • An image of a LUKS disk has to be searched without touching the original.

Works With

Formats
LUKS1 and LUKS2, with PBKDF2, Argon2i and Argon2id key slots.
Ciphers
AES, Serpent, Twofish and Camellia in XTS, CBC-ESSIV and CBC-plain.
Keys
Passphrases and key files; QNAP volume passwords and Synology recovery key files (being tested).
Sources
Linux and NAS disks, SSDs and pen drives and raw, E01, VHD(X), VMDK and QCOW2 images of them.

Its Limits

  • A passphrase or key file that fits one of the volume's slots is needed. Nothing is guessed or cracked.
  • LUKS1 has been tested on a real volume with data; LUKS2 only as far as its key slot.
  • QNAP and Synology encrypted volumes have passed tests with built keys only.
  • A volume whose LUKS header and LUKS2's copy of it, were written over cannot be opened.
  • Scanning a disk image needs Professional or Enterprise and an E01 image Enterprise.

Why People Pick DRE Pro For This

Not a list of adjectives. These are the three things that change what happens to your files in this kind of recovery. DRE Pro only reads the damaged drive, shows you what it found before you pay and puts a real person on the phone when you are not sure what to do next.

No Linux Needed

Nothing to boot, no cryptsetup and no command line: it all happens on the Windows PC you have.

Your Passphrase Stays Yours

Held in memory while DRE Pro runs, never saved, logged or put in a report; a report says only how the volume was unlocked.

Unlock And Scan Free

Unlocking a partition, scanning it and previewing need no licence; saving the files does.

Updated . Written and checked by the DataRecoverix team.

What LUKS Is

LUKS, the Linux Unified Key Setup, is the standard disk encryption on Linux. A header at the start of the partition holds key slots, up to 8 in LUKS1 and 32 in LUKS2 and each slot holds the volume's key, locked with one passphrase or key file. Any one of them opens the volume. Ubuntu, Fedora, Debian and most other distributions offer it when they install with disk encryption and NAS boxes use it for encrypted volumes.

Because the key is in the header, a LUKS volume whose header has been written over cannot be opened by anyone, even with the right passphrase. LUKS2 keeps a second copy of its header and DRE Pro reads either.

Do not let Windows initialise or format a Linux disk it cannot read. Formatting writes over the LUKS header.

What Has Been Tested

LUKS1 unlocking is tested on a real LUKS1 volume, whose file system then reads. For LUKS2, the Argon2i key slot of a real LUKS2 volume gives the right volume key, but a LUKS2 volume with data on it has not yet been scanned in our tests.

The QNAP and Synology routes are built from public descriptions of how those boxes make their keys and pass our tests with keys built the same way. Real QNAP and Synology encrypted volumes are still to be tested.

Encrypted Synology Shared Folders

Synology's encrypted shared folders are not LUKS: they use eCryptfs, which encrypts each file and its name. DRE Pro opens them with their passphrase, names included; the NAS Data Recovery page covers the rest of a NAS.

Questions People Ask Before This One

Short, honest answers. For anything else, the support desk picks up Monday To Saturday, 11:00 AM To 7:00 PM.

Can I Open A LUKS Encrypted Drive In Windows?
Not with Windows itself. DRE Pro opens LUKS1 and LUKS2 volumes on Windows 10, 11 and Windows Server with the passphrase or key file and reads the Linux file system inside, read-only.
Can DRE Pro Recover A LUKS Drive Without The Passphrase?
No. A LUKS volume opens only with a passphrase or key file that fits one of its slots. DRE Pro does not guess or crack passphrases and no honest tool claims to.
Can It Recover Deleted Files From An Encrypted Linux Partition?
Yes, once it is unlocked: it is scanned like any Linux partition. Quick Scan lists what the file system's records still hold, deleted ext3 and ext4 files can come back by name from the journal and Deep Scan finds more by their contents.
My QNAP Or Synology Volume Is Encrypted. Can It Be Read?
This is being tested on real NAS disks. A QNAP volume is tried with its volume password, a Synology volume with its recovery key file. Take the disks out and connect them to the PC or open images of them.
Is My Passphrase Saved?
No. The passphrase or key file is kept in memory only while DRE Pro runs. It is never saved, logged or put in a report; a report says only how the drive was unlocked. If you close DRE Pro and resume a scan later, it asks for the passphrase again.

More Software Pages

All Software

What Happened To Yours?

Every Situation

Pick the situation closest to yours. Each page explains what usually happened to the drive, which scan to run, what can and cannot come back and the one mistake to avoid before you start, so the loss does not get worse while you read about it.

Drives This Covers

All Drives

Scan For Free.
Pay Only To Save.

See every file DRE Pro can bring back before you pay anything. Buy a licence only when you want your files saved.