Drive Health Check. Know Before You Scan.
Scanning a failing drive for hours can finish it off. Before you recover from a drive that clicks, slows down or disconnects, DRE Pro's Drive Check runs a hard drive health check: it reads the drive's own health report, samples the surface for a few minutes and tells you in plain words whether to scan it, image it first or stop and take it to a specialist.
What Drive Health Check Looks Like In DRE Pro
These are the tools DRE Pro gives you for this job and what each one does. The free download includes the scan and the preview, so you can see what it finds on your own drive before you decide whether a licence is worth buying.
Quick, Standard, Advanced
A read sample of about 1, 2 or 5 minutes, spread across the drive. Advanced also measures zone speeds.
S.M.A.R.T. And Temperature
Reallocated and pending sectors, temperature and, for an SSD health check, its wear, where the drive reports them.
Read Failures Counted
Failed and slow reads are counted live, without retries that strain a weak drive.
Plain Verdicts
Fine to scan, image first, cool it down, back up now or consult a specialist.
Stops On Instability
If reads keep failing, the check stops; a recovery scan pauses and asks, with every find kept.
Never Writes
Every test only reads. Nothing is written to the drive being checked.
The Drive's Own Health Report, In Plain Words.
Inspect A Drive shows the model, capacity, temperature and S.M.A.R.T. health. Concerns are marked and the advice that follows is written for people, not engineers.
How It Works, Step By Step
- Connect the drive and open Drive Check from Disk Tools.
- Pick Quick, Standard or Advanced.
- Read the verdict and the health panels.
- Scan, image first or stop, as the advice says.
Is This The Right Tool? The Short Answer
It is the right tool if your situation is under Use It When and your drive is under Works With. Check Its Limits before you buy. The free download scans the drive and shows the files it finds, so you can see the result before you pay anything.
Use It When
- A drive has started clicking, slowing down or disconnecting.
- You want to know whether a drive is safe to scan before recovery.
- You are about to trust an old or second-hand disk with your files.
- Windows shows a SMART warning and you want it in plain words.
Works With
- Drive Health
- The drive's own S.M.A.R.T. report: reallocated and pending sectors, temperature, power-on hours and, for SSDs, wear and TRIM.
- Drive Check
- Quick (under a minute), Standard (about 2 minutes) or Advanced (about 5 minutes), with a surface map and a read-speed chart.
- Drives
- Hard disks and SSDs by SATA or NVMe, USB disks, pen drives and cards.
Its Limits
- Drive Check reads a sample of the drive, not every sector. A clean result is not a guarantee that there are no bad sectors.
- It does not repair bad sectors. No recovery tool should.
- Many USB enclosures, pen drives and cards do not pass on S.M.A.R.T. data. DRE Pro says so rather than guessing.
- Drive Check never writes. The separate Write Test does and it erases the drive.
Why People Pick DRE Pro For This
Not a list of adjectives. These are the three things that change what happens to your files in this kind of recovery. DRE Pro only reads the damaged drive, shows you what it found before you pay and puts a real person on the phone when you are not sure what to do next.
A sample, not a full surface scan, so it finishes before it adds wear.
The same monitor pauses a recovery scan when the drive turns unstable.
Drive Check, Drive Health and Partition Information come with the Professional and Enterprise editions.
Updated . Written and checked by the DataRecoverix team.
A Sample, Not A Surface Scan
To check hard drive health without wearing it out, Drive Check reads a spread of places across the drive in 1 to 5 minutes. It catches a drive that is failing broadly, but it does not read every sector, so a clean result is not a promise that there are no bad sectors. That is deliberate: reading every sector of a weak drive is exactly the wear you are trying to avoid before recovery.
What a drive reports depends on the drive. Many USB enclosures and some pen drives and cards report no S.M.A.R.T. data at all and DRE Pro says so rather than guessing.
Questions People Ask Before This One
Short, honest answers. For anything else, the support desk picks up Monday To Saturday, 11:00 AM To 7:00 PM.
Is This A Full Bad Sector Check?
Can It Repair Bad Sectors?
Why Is No SMART Status Shown?
Does Drive Check Need A Licence?
More Software Pages
All Software
Disk Imaging And Cloning
Copy a weak drive, clone a disk

Fake Pen Drive Check
How much a pen drive or card really holds

Corrupted Drive Recovery
RAW, unreadable or will not open
What Happened To Yours?
Every SituationPick the situation closest to yours. Each page explains what usually happened to the drive, which scan to run, what can and cannot come back and the one mistake to avoid before you start, so the loss does not get worse while you read about it.

External Disk Not Opening
Not opening or opening with nothing inside

Partition Lost
A drive letter gone from This PC

Video Will Not Play
Recovered clips that refuse to open
Drives This Covers
All DrivesScan For Free.
Pay Only To Save.
See every file DRE Pro can bring back before you pay anything. Buy a licence only when you want your files saved.
Data Recovery Software
Hard Drive Data Recovery
SSD Data Recovery
Deleted File Recovery
Memory Card Not Opening