RAID Recovery. Put The Set Back Together, Then Read It.

A RAID volume is spread across several disks, so none of them makes sense alone. DRE Pro is RAID recovery software that reads each member, works out how the set was built, assembles it in memory without writing to any disk and scans the result like an ordinary partition. Auto Build RAID does this in one click and says which scan to run. A set missing one disk is rebuilt from the others where its RAID level allows.

What RAID Recovery Looks Like In DRE Pro

These are the tools DRE Pro gives you for this job and what each one does. The free download includes the scan and the preview, so you can see what it finds on your own drive before you decide whether a licence is worth buying.

01

Linux md RAID

Linear, RAID 0, 1, 4, 5, 6 and 10, as used by Synology, QNAP and other NAS boxes.

02

Linux LVM2

Linear, striped and mirrored logical volumes, including LVM on top of md RAID.

03

Windows Dynamic Disks

Dynamic disk recovery for simple, spanned, striped, mirrored and RAID-5 volumes.

04

Storage Spaces

Simple and two- or three-way mirror spaces are put together from the pool's disks; a mirror missing a disk is read degraded.

05

ZFS Mirrors

One disk of a ZFS mirror holds every file, so it is read on its own, as TrueNAS and Proxmox write it.

06

Hardware RAID

Dell PERC, LSI MegaRAID and other controllers that write SNIA DDF records: RAID 0, 1, 5, 6, 10 and JBOD are put together from the records on the disks.

07

SAS Drive Images

Images of SAS drives formatted with 520-, 528- or 4,160-byte sectors are recognised in any image format and read without the protection bytes.

08

Degraded Sets

A member missing from a RAID 1, 5, 6 or 10 is rebuilt from the others and two from a RAID 6.

09

One Disk Of A NAS

With more disks missing than the parity can rebuild, the disks that are here are still read and each file is marked whole or partly on a missing disk.

10

Any Image Of A Member

Raw, split, E01, VHD, VHDX, VMDK or images a hardware imager saved as numbered chunk files. Image each weak disk first, then build the set from the images.

11

Never Saves To A Member

Recovered files are refused on any disk that belongs to the set.

The Set Appears As One Volume.

Connect the member disks or open an image of each and the set is listed under RAID And Volume Sets as Complete, Degraded or Cannot Be Assembled.

How It Works, Step By Step

  1. Label each disk with its bay number and take the disks out of the NAS or server.
  2. Connect them all to a Windows PC or image the weak ones first.
  3. In RAID Recovery, add each disk or image and click Auto Build RAID.
  4. Run the scan it recommends and save the files to a separate drive.

Is This The Right Tool? The Short Answer

It is the right tool if your situation is under Use It When and your drive is under Works With. Check Its Limits before you buy. The free download scans the drive and shows the files it finds, so you can see the result before you pay anything.

Use It When

  • A NAS box or server failed and its disks were taken out.
  • A RAID 5 lost one disk and the controller will not rebuild it.
  • A hardware RAID controller died and nobody knows how the array was set up.
  • A Windows dynamic disk set of spanned, striped or mirrored volumes stopped working.

Works With

With Metadata
Linux md RAID (linear, 0, 1, 4, 5, 6, 10), hardware RAID with DDF records (Dell PERC, LSI MegaRAID: 0, 1, 4, 5, 6, 10, JBOD), LVM2, Windows dynamic disks, Storage Spaces simple and mirror spaces and ZFS RAID-Z1/2/3 and striped pools are assembled from their own records.
Without Metadata
Auto Build RAID finds the level, stripe size, parity rotation and member order of RAID 0, 1, 5, 6 and 10, including DDF's RAID 6 rotations. Spanned volumes and any layout you know can be entered by hand.
Members
The disks themselves or an image of each: raw, split, E01, VHD/VHDX, VMDK or numbered chunk files from a hardware imager, including images of SAS drives with protected sectors. Nothing is ever written to a member.

Its Limits

  • Synology, QNAP and hardware RAID sets with DDF records (Dell PERC, LSI MegaRAID) are tested on lab-built sets made to their published layouts and NAS RAID on a real WD My Cloud disk. A controller or NAS firmware that writes its records differently may need Auto Build RAID or a layout entered by hand.
  • Storage Spaces parity spaces are recognised but not assembled and writes still in a space's write-back cache are not applied. ZFS dRAID pools are recognised but not assembled.
  • RAID 50 and 60, delayed parity and vendor-specific layouts are not supported in RAID Recovery. HP Smart Array, Adaptec and Intel RST records are not read; those arrays are worked out from their data.
  • A SAS drive with 520-byte sectors attached straight to a PC may not be readable through Windows. Image it with the controller's or imager's tools, then add the image.
  • Working the layout out from the data needs NTFS or ext on the members and works out the order for up to 8 members. With more, you enter the order and check it.
  • RAID recovery, Auto Build RAID and scanning an assembled set need the Enterprise edition. The free download shows these tools locked.
  • A set missing more disks than its level tolerates cannot be rebuilt: one for RAID 5, two for RAID 6. RAID 6 with two missing is rebuilt from its P and Q parity, with Q computed as Linux md or DDF controllers compute it; a controller that computes Q another way is rebuilt with one missing.

Why People Pick DRE Pro For This

Not a list of adjectives. These are the three things that change what happens to your files in this kind of recovery. DRE Pro only reads the damaged drive, shows you what it found before you pay and puts a real person on the phone when you are not sure what to do next.

Nothing Rebuilt On The Disks

Assembly happens in memory. No metadata is written, so the set can still go back in the NAS.

Status You Can Trust

Before any RAID data recovery, the set is said to be Complete, Degraded or Cannot Be Assembled.

File Systems Inside

ext4, Btrfs, XFS, ZFS, NTFS and more are read once the set is together.

Updated . Written and checked by the DataRecoverix team.

When The Controller Is Gone

Auto Build RAID works the layout out for you. A hardware RAID card or a NAS keeps the array's layout in its own records and when the card dies the disks alone do not say how they fit together. DRE Pro reads the controller's records where they survive and tests the data where they do not.

If the disks still carry the controller's own records, as Dell PERC and LSI MegaRAID write them (SNIA DDF), Auto Build RAID reads the level, stripe size, order and where the data starts from them. If not, it works the layout out from the data: it tries the levels, stripe sizes, parity rotations and member orders against the file system it finds on them and tries again with one disk assumed missing. It then looks inside the best layouts and recommends a Quick, Deep or RAW scan. A layout with weak evidence is shown for you to review with Preview, never accepted on its own.

Do not let a NAS or controller rebuild a failing array before you have images of the disks. A rebuild onto a bad disk can overwrite what you want back.

Questions People Ask Before This One

Short, honest answers. For anything else, the support desk picks up Monday To Saturday, 11:00 AM To 7:00 PM.

Can It Recover A Synology Or QNAP NAS?
Usually. They use Linux md RAID, often with LVM and Btrfs or ext4, all of which DRE Pro reads. This is tested on lab-built sets and a real WD My Cloud disk; the NAS Data Recovery page has the details.
Can It Recover RAID 5 With One Failed Disk?
Yes. RAID 5 data recovery with one disk missing works: with the other members connected, the missing disk's data is rebuilt as the set is read.
Do I Need To Know The Stripe Size?
No. DRE Pro reads the layout from the md, DDF, LVM or dynamic disk records on the members. For an array with no such records, Auto Build RAID works out the level, stripe size and order from the data.
Can It Read Disks From A Dell PERC Or LSI MegaRAID Server?
Yes. Those controllers write SNIA DDF records at the end of each disk and DRE Pro reads the layout from them for RAID 0, 1, 5, 6, 10 and JBOD. RAID 50 and 60 are listed but not assembled.
What About SAS Drives With 520-Byte Sectors?
Images of SAS drives formatted with 520, 528, 4,104, 4,160 or 4,224-byte sectors are recognised from their contents, inside raw, E01, VHD or any other image and read without the protection bytes. Image such drives with your SAS controller's or imager's own tools first: Windows often cannot read them directly.
Does It Support Storage Spaces?
Yes, for simple and mirror spaces: connect the pool's disks and the space is put together from them. Parity spaces are listed but not assembled and writes still in a space's write-back cache are not applied.
Does DRE Pro Run On Windows Server?
Yes. DRE Pro runs on Windows Server 2016, 2019, 2022 and 2025 with the Desktop Experience, 64-bit, as well as on Windows 10 and 11. Server Core and Nano Server have no desktop, so they cannot run it; connect those servers' disks or images of them, to a Windows PC with DRE Pro instead. Windows Server 2012 and 2012 R2 are not supported.

More Software Pages

All Software

What Happened To Yours?

Every Situation

Pick the situation closest to yours. Each page explains what usually happened to the drive, which scan to run, what can and cannot come back and the one mistake to avoid before you start, so the loss does not get worse while you read about it.

Drives This Covers

All Drives

Scan For Free.
Pay Only To Save.

See every file DRE Pro can bring back before you pay anything. Buy a licence only when you want your files saved.